Enigma › Forums › Generic discussions regarding assembling, troubleshooting and using the kit › Kit #55 working › Reply To: Kit #55 working
Don’t remember what changes that where done exactly for v1.08 (and I’m not checking) but one thing that was recently done was to change order of things a little so a standalone arduino works a little better. Don’t know how that would have impacted you but apparently it did.
Yes, R119/120 are on the lines and that is possible why it’s no connection. You need to measure from sound module to R119/120, then from other side of resistor to arduino D8/D9.
Start with resoldering the resistors, then move on to measure it.
- This reply was modified 4 months, 3 weeks ago by me2016.